TACX exercise bike | Roller trainer NEO 2T Smart T2875
The Tacx Neo 2T is the smart trainer in a class of its own! With its well-thought-out features and ultra-realistic driving experience, even the longest winter will be less frightening. The previous version was already impressive due to its low noise level. Thanks to a new design of the neodymium magnets, the 2T version has become significantly quieter. Both noise caused by internal air turbulence and vibrations at low pedal frequencies were reduced to a minimum.
Thanks to its powerful chip, the resistance can be adjusted extremely quickly and smoothly. Improved software compared to the Neo 2 immediately provides the necessary resistance even when sprinting uphill from low speeds. With a large internal memory, the NEO 2T is prepared for future indoor cycling app functions. For a wide range of applications, adapters for 12x142 mm and 12x148 mm BOOST thru axles are included in the scope of delivery. As a further innovation compared to the Neo 2, you can also use the thru axle installed on your bike with the 2T version.
Pedal analysis
The NEO 2T detects the exact position of the legs while pedaling using a capacitive sensor on the left and right sides. In combination with the power meter, a precise analysis of the force distribution can be carried out. With this data you can specifically optimize your pedaling and compensate for any imbalances.
Direct drive
Clamping the rear triangle on the trainer enables more user-friendly and realistic training. By eliminating transmission components, speed, power and cadence can be measured very precisely. In addition, the direct drive is maintenance-free and, due to its design, there is no slip or tire wear.
Smart
The NEO 2T works perfectly with the most popular training apps and software programs to create the ultimate indoor training experience. It can be connected to your smartphone, tablet or PC via Bluetooth Smart or ANT+. Of course, the training data can also be displayed and saved on ANT+ or Bluetooth-enabled cycling computers.
Reliable
So that you can stick to your training zones exactly, the NEO 2T measures your performance with a maximum deviation of 1%. Due to its design, the NEO 2T is the only roller trainer that does not need to be calibrated.
Dynamic inertia
In contrast to conventional trainers, the NEO 2T simulates your actual body weight using the principle of dynamic inertia. Depending on the simulated incline or your speed, the feeling of pedaling changes, just like on the road.
Departure simulation
For an even more realistic riding experience, the NEO 2T accelerates when you ride over a hill into the descent with Zwift or other software and can simulate the easier pedaling on descents with a gradient of up to 5%.
Virtual flywheel
The realistic driving experience is made possible by the virtual flywheel of the NEO 2T. Unlike a traditional flywheel, the resistance and inertia when pedaling is controlled by a motor brake with 32 neodymium magnets rotating around 30 coils. Depending on the rider's weight, incline and speed, the resistance is adjusted via the current strength 1000 times per second to create a realistic driving experience.
Powerful
Thanks to its powerful engine brake, the NEO 2T can brake up to 2200 watts of power at 40 km/h and simulate up to 25% inclines. This makes it ideal for even the most intensive forms of training and only the driver is the limiting element.
Road Feel
In combination with Tacx films or Zwift, the NEO 2T can simulate various road surfaces such as cobblestones or gravel due to vibrations.
Flexible
In order to protect the bicycle frame and allow you to move naturally, the frame of the NEO 2T allows a few degrees of freedom of movement to the right and left. The bike can therefore be easily swiveled when riding out of the back for an even better driving experience.
Self-sufficiency
The NEO 2T Smart can be used at any time without a power source because it produces its own electricity while driving. Only the descent simulation is only available in network operation. Even if you don't have a smartphone or tablet at hand, you can train with the NEO 2T. Without software or an app, the trainer works with a progressive increase in power that precisely replicates driving on a flat road.
Low noise
Because the Neo 2T does not have a flywheel or an internal gear, it is probably the quietest trainer on the market. This means training is possible at any time and anywhere.
Technical data:
Material : aluminum, steel, plastic
Type of trainer : interactive roller trainer with direct drive
Data transmission : Bluetooth, ANT+ (power, speed, cadence)
Power supply : 110-240 V (can be used with or without a power plug)
Control : via smartphone, tablet or cycling computer
Data display : Smartphone, tablet, cycling computer, Windows, Mac
Compatibility Software : Tacx Software & App, Zwift, Trainerroad, Kinomap, The Sufferfest and other
Power measurement : integrated power meter (+/- 1% accuracy)
Resistance : magnetic (32 neodymium Magnets)
Resistance control : continuously variable Maximum resistance: 2200 watts at 40 km/h
Flywheel : virtual flywheel (simulates system weights up to 125 kg)
Compatibility axle standard : 5x130/135 mm quick release (adapter for 12x142 mm thru axle and 12x148 mm BOOST thru axle included)
Freehub compatibility : Shimano | SRAM 10-, 11-speed ROAD (optional Campagnolo freehub body available)
Dimensions (LxWxH) : 575x750x550 mm
Dimensions folded (LxWxH) : 620x260x440 mm
Color : black, blue
Weight according to the manufacturer : 21.5kg
Weight weighed by yourself : kA